R
E
T
U
R
N
  Seals Eastern, Inc.
Seals, gaskets, and o-rings
 
Compound 7204 Data Sheet
Description: Y267-Type EPM formulation for use in high temperature steam and geothermal wells. Performs well in steam, brine, sour-gas, isobutane.
Physical Properties:
ASTM Method Property Avg. Value Min. Value
D412 Method A Tensile Strength  2218 psi  1900 psi
Ultimate Elongation  85%  80%
Stress at Elongation    
- M25  1207 psi   psi
- M50  1719 psi   psi
- M100  2001 psi   psi
Strain Energy/ Unit Volume at 20% elongation  119 psi  
Calculated Shear Modulus, G  1438 psi  
Calculated Youngs Modulus, E  4314 psi  
E-secant from the initial slope  4056 psi  
D624, Die B Tear Strength  146 psi  
Max Value Min Value
D2240, Type A Durometer Hardness  92 points  85 points
D297, 15 Specific Gravity  1.121  
         
D395, Test B Compression Set Avg. Value  
22 hrs @ 257F %  
70 hrs @ 257F 13%  
336 hrs @ 257F %  
D865 Dry Heat Aging
Change in Tensile Change in Elongation Change in Durometer
70 hrs @ 257F % %  points
168 hrs @ 257F % %  points
336 hrs @ 257F % %  points
1000 hrs @ 257F  %  %  points
  Temperature Data  
D746 Brittle Point  F
D1329 Temp Retraction TR-10  F
Glass Transition  -60F
Max Operating Temp  F
Rev.  8/30/1995 Shelf Life (years)

Meets specification: R-8-1, ES-R-17  
    
    

RETURN

LEGAL NOTICE: Seals Eastern makes no representations or warranties, implied or otherwise, on the accuracy or completeness of the data herein.

Copyright 2011 Seals Eastern, Inc.

SEALS EASTERN
MOLDING SUCCESS FOR 50 YEARS.

7182 is a trademark of Seals Eastern, Inc.; AFLAS is a registered trademark of Asahi Glass Co., Ltd.; Viton is a registered trademark of Dupont Performance Elastomers, LLC.

Format Rev: 11/17/11